graph TB
subgraph "Boost升压转换器"
A["锂亚电池 \n 3.6V"] --> B[输入滤波]
B --> C[保护电路]
C --> D["VBQG1201K \n 主开关"]
subgraph "控制环路"
E["PWM控制器"] --> F["栅极驱动器"]
F --> D
G["电压反馈"] --> H["误差放大器"]
H --> E
end
D --> I[升压电感]
I --> J[续流二极管]
J --> K[输出电容]
K --> L["12V系统电源"]
L --> M[负载]
M --> G
end
subgraph "负载动态管理"
N["MCU"] --> O["PMIC控制"]
O --> P["工作模式切换 \n (PFM/PWM)"]
P --> E
Q["负载检测"] --> R["功率预测"]
R --> S["动态调压"]
S --> E
end
subgraph "保护机制"
T["过压保护"] --> U["关断信号"]
U --> E
V["过流保护"] --> W["限流电路"]
W --> D
X["温度监控"] --> Y["热关断"]
Y --> E
end
style D fill:#e8f5e8,stroke:#4caf50,stroke-width:2px
阀门电机驱动拓扑详图
graph LR
subgraph "集成半桥驱动"
A["12V电源"] --> B["VBQF3310G \n 高端N-MOS"]
A --> C["VBQF3310G \n 低端N-MOS"]
subgraph "控制逻辑"
D["半桥控制器"] --> E["电平转换"]
E --> F["高侧驱动"]
D --> G["低侧驱动"]
end
F --> B
G --> C
B --> H["电机输出端"]
C --> I["功率地"]
H --> J["阀门电机"]
J --> I
end
subgraph "保护与监控"
K["电流检测"] --> L["比较器"]
L --> M["过流保护"]
M --> D
N["RC吸收网络"] --> H
O["TVS保护"] --> B
O --> C
P["温度传感器"] --> Q["热管理"]
Q --> D
end
subgraph "电机控制策略"
R["MCU"] --> S["PWM生成"]
S --> D
T["位置反馈"] --> U["闭环控制"]
U --> R
V["堵转检测"] --> W["保护策略"]
W --> R
end
style B fill:#e3f2fd,stroke:#2196f3,stroke-width:2px
style C fill:#e3f2fd,stroke:#2196f3,stroke-width:2px
智能负载切换拓扑详图
graph TB
subgraph "低压直驱负载开关"
A["MCU GPIO \n 3.3V/1.8V"] --> B["VBA7216 \n 栅极"]
subgraph "N沟道负载开关"
C["VBA7216 \n 源极"] --> D["3.3V电源"]
B --> E["VBA7216 \n 内部驱动器"]
E --> F["VBA7216 \n 功率开关"]
F --> G["VBA7216 \n 漏极"]
end
D --> C
G --> H["负载模块"]
H --> I["负载地"]
end
subgraph "多通道负载管理"
J["通道1控制"] --> K["VBA7216-1"]
L["通道2控制"] --> M["VBA7216-2"]
N["通道3控制"] --> O["VBA7216-3"]
K --> P["超声波传感器 \n 峰值电流:50mA"]
M --> Q["无线模块 \n 峰值电流:200mA"]
O --> R["显示屏 \n 峰值电流:30mA"]
end
subgraph "时序与保护"
S["上电时序控制"] --> T["电源管理IC"]
T --> U["软启动控制"]
U --> A
V["过流检测"] --> W["快速关断"]
W --> A
X["状态反馈"] --> Y["故障诊断"]
Y --> MCU
end
style F fill:#fff3e0,stroke:#ff9800,stroke-width:2px
点击下载：VBQF3310G规格书
中文
English
